ID # 28594706

Westernplows MVP PLUS™ V-PLOW

Videos

Call for Price

Get a Quote Get Financed Contact Us Get Directions Get Directions Print

TAKE ON MORE
WITH V-PLOW PERFORMANCE

Like all WESTERN® products, the MVP PLUS™ v-plow is built for efficiency, durability and performance—but it also gives you the added level of productivity that only a v-plow can achieve, letting you cut through deep banks and clear more snow in fewer passes.

Specifications

Model

MVP PLUS™ V-PLOW

Category Name

Snowplows

Year

2023

Manufacturer

Western

unique features

PLOW BLADE CONSTRUCTION

The MVP PLUS™ v-plow is available in 14-gauge powder coated steel or 1/4" high-density polyethylene in 8' 6" and 9' 6" widths.

The durable poly blade provides a slick surface for enhanced snow-rolling action and a maintenance-free surface. The steel blade features our high quality ULTRAFINISH™ powder coated surface.

The 70-degree attack angle provides a clean scrape, and a high carbon steel cutting edge comes standard, reducing wear and extending the life of the blade.

Structural Reinforcement

Eight vertical ribs on the 8' 6" and 9' 6" models, combined with the exclusive WESTERN® POWER BAR, provide exceptional torsional strength and rigidity to eliminate blade twisting. The high-strength steel base channel provides extra support along the bottom of the plow blade.

A 1" diameter steel center pin resides within a two connection point hinge, keeping the wings tight for optimal performance.

RELIABLE HYDRAULICS

We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.

Fully enclosed components are protected from the elements.

Trip Protection

Each blade features independent trip edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.

Double-Acting Cylinders

As a standard feature on the MVP PLUS™, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.

The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

Steel Center Gap Cover

For the cleanest pass in any position, the MVP PLUS™ v-plow has a snow control deflector over the center hinge to help prevent snow from being lost over the top.

standard plow features

NIGHTHAWK™ Snow Plow Headlights

Available in both LED and Dual-Halogen models, NIGHTHAWK™ plow lights are engineered and tested for maximum light output, performance and durability to keep you ahead of the storm.

PLOW CONTROL OPTIONS

Choose between a CabCommand hand-held control with push buttons or a joystick control, based on operator preference. For efficient, precise and intuitive blade control while plowing, both controls feature power “on” and “float” LED lights, backlighting for night operation, and plug-in connector for easy removal.

SECURITY GUARD™ ANTI-THEFT SYSTEM

The exclusive WESTERN® SECURITY GUARD™ snow plow anti-theft system is a safe and secure way to electronically lock your snow plow when it is detached from your truck. Unlike physical locks that can easily be cut or removed, the system provides a deterrent against theft by allowing you to electronically lock the snow plow's hydraulic functions, rendering your plow inoperable to unauthorized users.

ULTRAFINISH™ BAKED-ON POWDER COAT

The ULTRAFINISH™ baked on powder coat with epoxy primer is standard on all WESTERN® plows, providing outstanding protection against wear and rust. Each WESTERN plow goes through an automated eight-wheel shot blaster pre-treatment process and multi-stage pre-wash to prepare the plow surface for optimum coating adhesion.

After that a durable epoxy primer is applied to improve corrosion resistance and enhance powder coat adhesion. The powder coat is then applied with robotic guns that ensure precise, consistent powder coat coverage. The final baking process seals the long-lasting hard-as-nails WESTERN red coat. The result is a state-of-the-industry finish that will provide superior protection for your plow, season after season.

Isolation Module

This advanced snow plow light and electrical system features improved electrical pins in the harness for trouble-free connections. An underhood module improves system life and complies with OEM requirements. No toggle switch needed to change from vehicle to plow lights.

UltraMount® 2 SNOWPLOW MOUNTING SYSTEM

The UltraMount® 2 system is designed for fast and easy installation and removal using a simple mechanical system. It features a robust one-piece design and is 100% compatible with UltraMount® system mounts and electrical platforms.

CHAIN LIFT SYSTEM

The mechanical chain lift system offers a variety of performance and reliability advantages over a hydraulic system.

FLEET FLEX ELECTRICAL SYSTEM

The FLEET FLEX electrical system provides true fleet interchangeability. The same FLEET FLEX CabCommand hand-held or joystick control can operate any UltraMount® and UltraMount® 2 mounted plow on any truck at any time.

Pre-Punched Blades for Accessories

The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.

featured accessories

WING EXTENSION KIT

Get more jobs done faster with wings. These plow wings increase the overall plowing width by one foot, add up to 30% more carrying capacity, and minimize snow spill-off. Made of 12-gauge steel with high strength steel ribs, these durable wings attach quickly and easily with a single pin.

*Wing Extension Kits cannot be used simultaneously with Curb Guards.

BLADE STOP KIT

Protect your plow by ensuring heavy snow loads are distributed evenly with the blade stop kit. Made of reinforced, 0.188" high-strength steel that reduces stress on the plow's back iron and hydraulic rams for improved service life and performance. The easy-to-install kit comes with all of the required hardware.

CONVERSION KIT

This easy-to-use UltraMount® to UniMount® conversion kit enables you to attach a UniMount plow to a vehicle equipped with an UltraMount System vehicle mount. This kit is perfect if you have multiple snow plows, providing your fleet with versatility while changing to the UltraMount System. It is also ideal when transferring an old UniMount plow to a late model vehicle. When you are ready to replace the UniMount plow, the truck will already be equipped with the mount and wiring for any UltraMount® or UltraMount® 2 plow. Designed for use with all Standard, PRO, and 8' 6" MVP® UniMount plows. Not compatible with Sport Utility or Heavyweight models.

specifications

MODELS	8' 6"	9' 6"
MOLDBOARD OPTIONS	Steel/Poly	Steel/Poly
BLADE TYPE	V-Plow	V-Plow
VEHICLE COMPATIBILITY	Truck Class 2 & 3	Truck Class 2 & 3
APPROX. WEIGHT* (WITHOUT MOUNT)	Steel: 880 lb Poly: 847 lb	Steel: 988 lb Poly: 964 lb
PLOWING WIDTH (FULL ANGLE)	Full Angle: 7'5" Scoop: 7'1" Full V: 7'7"	Full Angle: 8'3" Scoop: 7'11" Full V: 8'7"
BLADE WIDTH	8' 6"	9' 6"
BLADE HEIGHT	29"	31"
BLADE THICKNESS	Steel: 14 ga Poly: 0.25"	Steel: 14 ga Poly: 0.25"
TRIP SPRINGS	4	6
RIBS	8	8
LIFT CYLINDER	1.5" x 8"	1.5" x 8"
ANGLING RAMS	1.75" x 11"	1.75" x 11"
CUTTING EDGE	⅜" x 6" (Standard) ½" x 6" (Accessory)	½" x 6" (Standard)
MOUNT TYPE	UltraMount^® 2	UltraMount 2