Toro Reelmaster® 3550 82" (208 cm) Cutting Width

Specifications

Model	3910	Category Name	Lawn / Garden	Year	2025
Sale Type	New	Manufacturer	Toro	Height	74" (188 cm)
Length	110" (279.4 cm)	Weight	1,985 lbs. (900.38 kg) with (5) 18" 8-blade cutting units.	Controls	Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever, LED work light switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever.
Mowing Speed	0 - 7 mph (0 - 11.3 km/h)	Oil Capacity	3.5 U.S. qt. (3.3 L)	Width Of Cut	82" (208 cm)
Fuel Capacity	7.5 U.S. gal. (28.4 L)	Overall Width	94" (238.8 cm)	Reel Diameter	5 in. (12.7cm)
Transport Width	91" (231 cm)	Number Of Blades	11, 8	Electrical System	Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
Bedknife Adjustment	Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment.	Height Of Cut Range	8-Blade: 0.5" - 1.5" (13 mm - 38 mm) 11-Blade: 0.25" - 0.75” (6 mm -19 mm)	Ground Speed - Forward	0 - 10 mph (0 - 16.1 km/h)
Ground Speed - Reverse	0 - 3.5 mph (0 - 5.6 km/h)	Hydraulic Fluid Capacity	6 U.S. gal. (22.7 L)	Clip Frequency/Backlapping	5" reel 2,350 (+/- 150) rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping.
Cooling System Description	Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity.	Cutting Unit Type/Configuration	Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.	Price	Contact for price CAD

Description

The Reelmaster 3550-D has a quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
18" (45.7 cm) version of fairway DPA cutting units to better handle fairway undulations. 22" (55.9 cm) rear cutting units can be installed to achieve additional overlap if desired.
Powered by a 24.8 hp (18.5 kW) Kubota diesel engine, the Reelmaster® 3550-D provides plenty of power to climb hills, even while running groomers and rear roller brushes.
The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it's gentle on the turf.
Smooth turf tires are standard to minimize turf damage.
With a weight that is on average 15-20 percent lighter then comparably equipped machines, the Reelmaster® 3550-D provides the ideal combination of turf friendliness and productive performance.
Dual Precision Adjustment (DPA) cutting units with Toro's EdgeSeries™ reels provide a consistent, high-quality cut and superior after cut appearance while reducing maintenance through improved reel edge retention

The Toro® Reelmaster® 3550-D floats effortlessly over contours in fairways and green surrounds. With a productive 82" (2.1m) cutting width, turf-friendly tires, the superior traction of a Series/Parallel 3-wheel drive system, and a weight of less than 2,000 pounds, the Reelmaster® 3550-D is engineered to make a big impression...without leaving one.

FEATURES

Quiet Operation

The Reelmaster 3550-D has a quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.

Enhanced Ground Following

18" (45.7 cm) version of fairway DPA cutting units to better handle fairway undulations. 22" (55.9 cm) rear cutting units can be installed to achieve additional overlap if desired.

Powerful Engine

Powered by a 24.8 hp (18.5 kW) Kubota diesel engine, the Reelmaster® 3550-D provides plenty of power to climb hills, even while running groomers and rear roller brushes.

Superior Traction

The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it's gentle on the turf.

Smooth Turf Friendly Tire

Smooth turf tires are standard to minimize turf damage.

Lightweight Design

With a weight that is on average 15-20 percent lighter then comparably equipped machines, the Reelmaster® 3550-D provides the ideal combination of turf friendliness and productive performance.

LITERATURE

Name	Link
Reelmaster Series Brochure	Download