SnowEx® DPS-250
MAKE QUICK WORK OF SIDEWALKS & PATHWAYSPlace salt exactly where it’s needed with the new line of stainless steel drop spreaders from SnowEx®. The Drop Pro 250 and Drop Pro 600 provide up to 36″ of spread width in a drop pattern to keep the salt exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other hard surfaces where truck equipment can’t easily gain access. |
|
|
|
|
EASY-TO ACTIVATE BAFFLESA 36" spread width makes applications on sidewalks and walking paths easy. When you factor in a 6" salt leach after application, the SnowEx drop spreaders can treat these surfaces with one or two passes and limit damage to the grass or sensitive surfaces right next to the path. The spread width can be limited to 30" by activating 3" baffles on either side of the trough. |
FREE-FLOWING MATERIAL DELIVERY SYSTEMThe material delivery system uses proven paddle geometry and a new interference baffle to agitate the surrounding material with every revolution. This ensures a consistent amount of material flows into the spreader trough and, at the same time, keeps it from bridging. |
EASY CLEAN-OUTThe entire trough drops open for easy and fast material clean-out when the job is done. Simply open a latch pin on the right and left sides, and the trough will swing backward to empty the hopper of its material. This allows you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job. |
CONSTRUCTION BUILT TO LASTLaser-cut stainless steel and high strength rivets are used to construct the new DPS-250 and DPS-600. Oil filled poly bearings are used to provide a long, maintenance-free service life. |
VARIABLE-SPEED CONTROLPrecisely match the weather conditions to the intended material delivery rate with enhanced speed control that includes a single variable-speed control knob to control the material flow rate. |
STANDARD 2" RECEIVER HITCHA detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader. |
STANDARD 3-POINT MOUNTThe 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch. This style of attachment is common on tractors but can also be found on some other types of equipment as well. |
STANDARD IN-BED MOUNTThe spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This type of installation reduces stress on the equipment since the weight is positioned over the rear wheel as opposed to behind them and allows for additional versatility to maneuver in tight spaces. |
MATERIAL FEED SYSTEMThe Material Feed System saves time and material while minimizing turf damage, making it the ideal tool for maintaining sidewalks and other narrow areas. The precise material flow, up to 36" spreading width and unique drop ability allow you to place material exactly where it’s needed, preventing bounce and scatter into landscape beds. It also has a gateless design to prevent. |
| Name | Link |
| Snowplows Brochure | Download |
Videos
Contact Us
635 Main Street East, Cambridge,Ontario N1R 5S7
Phone: 5196217805
Quick Links
Opening Hours
Monday - Friday
8:00AM - 5:00PM
Saturday
8:00AM - 12:00PM
Sunday
Closed
Location
Turn Key Web Solutions - Privacy Policy - All Items - Dealer Performance Login